 |
|
||||||||
|
||||||||
|
|||||||||||||
|
|||||||||||||
Standard Spec. |
|
CPU type |
Intel Celeron M- Dothan 1 GHz processor |
Front Side Bus |
400/533 MHz |
MB Chipset |
Intel 82852GM + ICH4 |
Graphics |
Integrated with Intel 82852GM Shared system memory up to 64MB |
LVDS |
Supports data format of 18 bits/36 bits |
TV-OUT/DVI |
TV output supporting up to 1024 x 768 graphics resolutions 10-bit video DAC outputs Support for all NTSC and PAL formats Provides S-video and 2pin Header for CVBS TV-out connector DVI-D single link Transmitter up to 165MHz DVI hot plug detection Digital Video Out Port DVO support 12bit interface , supporting up to UXGA |
Memory |
1x DDR SDRAM (max. 1GB) |
IDE |
Ultra ATA 100/66/33, 1x 40 pin 2.54mm, 1x44 pin 2.0mm Support Compact Flash card type II for ATA interface |
Audio |
AC-Link for Audio CODEC, AC’97 2.1 Mic-in / Line-in /SPDIF OUT support |
LAN |
1x Realtek RLT8100C 10/100 Mbps |
IO function |
2x 16C550 UARTs RS232 pin header 1x RX/RTS/TX for RS232 signal level In/out Supports IrDA 1.0/ASKIR protocol Supports PS2 keyboard and mouse |
USB |
2x USB 2.0(external) + 4x USB 2.0(internal) |
Video-In |
1x port with Conexant Fusion 878A video codec |
IEEE1394 |
Embedded 1394 link core OHCI Compliant programming interface 32bit Power managed PCI bus interface Integrated 400Mbit 2 ports PHY |
Touch Screen) |
C8051F321USB interface Touch screen controller Supported 4-, 5-, 8- wire Analog Resistive touch screen. Resister range from 200 to 1000 Ohm USB 1.1full speed sample rate (max. 300 point/s) |
Expansion interface |
1x Mini PCI for only PCI rev: 2.2 interface |
Power |
On board power DC +12V ±5% convert to +3.3V/+12V/+5V for system |
Dimension |
200 x 150 mm(MB) 74.7H x 263W x 178D mm(Chassis) 9H x 270W x 197D mm(8.4" panel) |
Operating Temperature |
0~40°C (with CF card or 2.5" HDD) Please upgrade the hard drive to industrial grade for better temperature performance |
Operating Humidity |
5~95%, non-condensing |
Optional Choice |
|
| 1. AU 8.4" Touch screen, 8 wires | |
2. mini PCI wireless LAN
 |
|
| 3. Digital I/O board (CN003) | |
| 4. upgrade to Realtek RLT8110SB/Intel 82541PI Gigabit LAN chip | |
| 5. upgrade to wide range power 9V~ 32V DC-IN ( incl. WDT/DIO & audio amplifier) | |
6. IDE converter board for 2.5" HDD (CN017)
 |
|
7. IDE to SATA card (PS017)
 |
|
| Remark: when CN003 is choosen, only CF card can be storage device. | |
| Remark: When opting for wide range power, only the CPU on board version can be ordered | |
